 |
A
visualization of the Katrina hurricane displayed
in SAGE on the iCluster. The Powerbook on the G4
shows researchers at Louisiana State University (with
a 2x2 Mac tiled display in the background) using
iChat to conference with the Scripps researchers. |
 |
NCSA’s
tornado movie displayed in SAGE. |
 |
John
Orcutt describes NSF-funded cyberinfrastructure projects
at Scripps to a TV crew |
 |
Kent
Lindquist and John Delaney take a closer look at
the 2003 San Diego Wildfires movie created using
HPWREN sensor data |
 |
The
Calit2-CEOA booth at SC05 |
 |
Scripps
graduate student Allison Jacobs talks about the aerial
photography of the La Jolla area |
 |
Theoretical
model of deformation in California along the San
Andreas fault after the 1906 San Francisco earthquake |
 |
Dr.
Frank Vernon in front of the iCluster displaying
multiple real time streams from the USArray and ROADNet
sensor networks. |
 |
Graduate
student Jose Otero talks to a news channel after
the 2005 Pakistan earthquake. |
| In
the images below, all four displays are being
driven by one Power Mac. We installed 2 ATI Radeon
9200 cards in the PCI slots besides the NVIDIA card
in the AGP slot. The ATI cards don’t support
the full resolution of the 30” monitors, so
in this image the displays are set to a lower resolution. |
 |
 |
| Atul
Nayak, Chris Garrod and Evan Morikawa look at USGS
aerial photos (1 foot resolution) on the displays. |
 |
 |
| San
Diego NBC 39 Channel 7 News team reports in front of the
iCluster display |
 |
|
| Visitors
from the IRIS DMS committee |
 |
 |
| Jon
Berger uses the ANFwall to show Channel 8 the real time
waveforms from the Nias event and a 3D Fledermaus scene
file that shows the topography of the region, the locations
of the earthquakes and the locations of sensors. |
 |
Graham Kent explains the geology of the Lake Tahoe region
with a Fledermaus scene file. |
 |
Apple
Computer representatives check out the iCluster. |
 |
 |
| The
SIO carpentry & machine shop built the mounts for
this system. The VESA adapters for the 30” monitors
were attached to a 2 inch block (to give the cables room
to dangle) and this assembly was attached to metal plates.
The metal plates were drilled into the wall. The machine
shop had to enlarge the holes in the VESA adapter to use
bigger screws. |
